Technical Superiority over any other Earthing Mechanisms.

Basically a good earthing is considered to provide a straight unobstructed ( less joints / twists / indirect connections ) path for the fault current to flow for instant dissipation. An earthing apparatus which has more Cross Sectional Primary Conducting area in sq.mm. and more surface area. The better and quicker dissipation of the fault current takes place.

The primary earthing that we have used in our UES is STRIPS yielding maximum Cross Sectional Primary Conducting area in Sq.mm.. It also provides a straight unobstructed path for the fault current as our terminal and primary electrode are one and same removing any joints, which helps in quick dissipation of fault current.

We have shown the CROSS SECTIONAL PRIMARY CONDUCTING AREA in this brochure for each of our UES for user ready reference. It is always advisable to use flat from the mains to connect to our UES.

For reference in the BIS book of IS 3043 1987 Code of Practice page no.21 sl.no.9.2.3. it is stated that strip electrodes are better compared to Pipe, Plate earthing and even pipe in pipe earthing, which are also good in high resistivity soil conditions.

NOTE :

The SIZE and the No. of EARTHING ELECTRODES should be recommended by your ELECTRICAL CONSULTANTS, ELECTRICAL ENGINEER OR YOUR ELECTRICAL CONTRACTORS depending on your infrastructure requirement.

OHMIC Value depends on soil conditions wherever it is used. Our Product can be used in the form of a Grid is used. Our Product can be used in the form of a Grid using 3 or more in nos. Duly interconnected for highly sensitive projects and wherever low OHMIC value is required.